Post by BxR XmonsterX on Dec 19, 2006 23:21:07 GMT -5
This is a Tuturial ONLY for the people that are bridging through 2 ethernet ports and a crossover cable.
IM GUESSING YOU HAVE ALREADY BRIDGED YOUR CONNECTIONS TOGETHER. BUT JUST IN CASE YOU HAVENT HERES A THE WAY TO DO IT.
a. Go to your control panel
b. click on Network and Internet Connections
c. Then Network Connections
d. Now there should be two Local connections "Local Area Connection" and "Local Area Connection 2"
e. Highlight both of them (local area connection 1 and 2) right click and click Bridge connections.
Your connections should now be bridged!
Now to learn how to use ZAP (ZoneAlarm Pro)
REQUIREMENTS:
- ZoneAlarm Pro
- Commview
STEP 1
Open ZAP and go to the Firewall section, then go to the Main tab and put your internet and trusted security setting to med.
IPB Image
STEP 2
Next go to the zones tab in the firewall section and click on the add botton right hand side then click on where it says Ip Adress and add the following ips make sure you keep all ips in trusted ( they are bungies and Xbox lives Ips )
IPB Image
add the following ip choose add from the bottom right then ip adress.
Needed Ip 1 - 65.59.234.161
Needed Ip 2 - 207.46.246.6
Needed Ip 3 - 65.59.232.45
NOW HOW TO BRIDGE SOMEONE HOST
STEP 1
Have the person who wants to be Host make their own party.
STEP 2
Open Commview and click the play button.
IPB Image
STEP 3
Now you should see ip's popping up. you might see a lot, or you might not see as many (depends on what programs your running)
Now you can tell who is in your party/game by looking at the In/Out.
IPB Image
In this case the person im bridging host has his IN/OUT going up really fast.
STEP 4
To find out their ip Look where it says Local Ip or Remote Ip. and it should tell you his ip adress. In my case its under Local Ip, but sometimes it pops up on Remote Ip.
IPB Image
STEP 5
Now go back to this screen and enter his ip.
IPB Image
Make sure u have it on trusted. and for descripition you can put whatever you want. I just put there gamertag.
STEP 6
Once you entered his ip in make you you have it on "trusted" and click "APPLY"
(VERY IMPORTANT)
IPB Image
STEP 7
Now Go to The main Firewall tab. and turn up your Internet Zone Security to "HIGH" and your Trusted Zone security to either Medium or Low.
IPB Image
And then ask the person you are bridging host if he can hear you. If he can then he is bridged if he cant hear you then you did something wrong.
and thats it! You are Done!!
IM GUESSING YOU HAVE ALREADY BRIDGED YOUR CONNECTIONS TOGETHER. BUT JUST IN CASE YOU HAVENT HERES A THE WAY TO DO IT.
a. Go to your control panel
b. click on Network and Internet Connections
c. Then Network Connections
d. Now there should be two Local connections "Local Area Connection" and "Local Area Connection 2"
e. Highlight both of them (local area connection 1 and 2) right click and click Bridge connections.
Your connections should now be bridged!
Now to learn how to use ZAP (ZoneAlarm Pro)
REQUIREMENTS:
- ZoneAlarm Pro
- Commview
STEP 1
Open ZAP and go to the Firewall section, then go to the Main tab and put your internet and trusted security setting to med.
IPB Image
STEP 2
Next go to the zones tab in the firewall section and click on the add botton right hand side then click on where it says Ip Adress and add the following ips make sure you keep all ips in trusted ( they are bungies and Xbox lives Ips )
IPB Image
add the following ip choose add from the bottom right then ip adress.
Needed Ip 1 - 65.59.234.161
Needed Ip 2 - 207.46.246.6
Needed Ip 3 - 65.59.232.45
NOW HOW TO BRIDGE SOMEONE HOST
STEP 1
Have the person who wants to be Host make their own party.
STEP 2
Open Commview and click the play button.
IPB Image
STEP 3
Now you should see ip's popping up. you might see a lot, or you might not see as many (depends on what programs your running)
Now you can tell who is in your party/game by looking at the In/Out.
IPB Image
In this case the person im bridging host has his IN/OUT going up really fast.
STEP 4
To find out their ip Look where it says Local Ip or Remote Ip. and it should tell you his ip adress. In my case its under Local Ip, but sometimes it pops up on Remote Ip.
IPB Image
STEP 5
Now go back to this screen and enter his ip.
IPB Image
Make sure u have it on trusted. and for descripition you can put whatever you want. I just put there gamertag.
STEP 6
Once you entered his ip in make you you have it on "trusted" and click "APPLY"
(VERY IMPORTANT)
IPB Image
STEP 7
Now Go to The main Firewall tab. and turn up your Internet Zone Security to "HIGH" and your Trusted Zone security to either Medium or Low.
IPB Image
And then ask the person you are bridging host if he can hear you. If he can then he is bridged if he cant hear you then you did something wrong.
and thats it! You are Done!!