Post by BxR XmonsterX on Dec 19, 2006 23:27:14 GMT -5
Posted - 11/02/2006 : 3:56:26 PM
--------------------------------------------------------------------------------
1. Open ZAP
2.Click on Firewall tab
3.Click on Expert tab
4. Click add
5. In new window type in name- Bungie and XBL
6.click source>then IP range
7.Name the new Iprange Bungie1
8.for the first ip put 65.59.234.161
9. for the 2nd ip put 65.59.234.164
10.click OK
11. NOW add the ips of bungie like this, add>ip address then type all of bungies and XBL's ips like this
12. name it bunige2, 3 4 according to how many ips you have
13. now click source>ip
14. now this one is your xbox so type in your xbox's ip and name it xbox (your ip for your xbox should be something like 192.168.1.XXX)
15.Now add all of these ips under source to destination so repeat all of the ips you have under source and add them under destination. the steps should be pretty much the same.
16. now what you did is you made it so you will always be have to communicate with XBL and Bungie no matter what protocol or anything
18.now click ok or add rule then under the main ZAP window click apply
19. now click add
20.under the new rule name it ALLOW TCP IN
21.Under source KEEP ANY
22. Under Destination add your xbox's ip so click add>ip address> type your xbox's ip in
23.now under PROTOCAL click add>add protocol
24.under the new window click press the down arrow and click TCP
25. name it TCP
26. now you should have 2 bars under you asking for remote a local ports
27.under local port put make sure the longer bar with the down arrow says "other" and the smaller bar with the down arrow says "any"
28. now highlight "any" and click backspace and type in "3074"
29. now under the 2 remote port bars make sure the longerone says other and the smaller one says "any" and change "any" to "3074"
30. Click OK to add the protocol
31. now make sure the source is "any" and destination is your xbox and that you are allow this rule... then click ok to add the rule
32. now all you have to do is the same exact thing as the 2nd rule but on this 3rd rule put the source as your xbox and destination as "any", keep the same thing for TCP and name this 3rd rule "Block TCP out" and finnally towards the upper right of the window there should be a pull down menu that says "allow", click the down arrow and select "block".
33.now add the 3rd and Final rule.
34. so your rules should look like this...
1.Bungie,XBL
2.Allow TCP IN
3. Block TCP OUT
36. alright now what this is doing is allow others to connect to you in TCP and UDP but you can only connect to them under udp not tcp so you are the only one that every one can connect to fully under tcp and udp.
--------------------------------------------------------------------------------
1. Open ZAP
2.Click on Firewall tab
3.Click on Expert tab
4. Click add
5. In new window type in name- Bungie and XBL
6.click source>then IP range
7.Name the new Iprange Bungie1
8.for the first ip put 65.59.234.161
9. for the 2nd ip put 65.59.234.164
10.click OK
11. NOW add the ips of bungie like this, add>ip address then type all of bungies and XBL's ips like this
12. name it bunige2, 3 4 according to how many ips you have
13. now click source>ip
14. now this one is your xbox so type in your xbox's ip and name it xbox (your ip for your xbox should be something like 192.168.1.XXX)
15.Now add all of these ips under source to destination so repeat all of the ips you have under source and add them under destination. the steps should be pretty much the same.
16. now what you did is you made it so you will always be have to communicate with XBL and Bungie no matter what protocol or anything
18.now click ok or add rule then under the main ZAP window click apply
19. now click add
20.under the new rule name it ALLOW TCP IN
21.Under source KEEP ANY
22. Under Destination add your xbox's ip so click add>ip address> type your xbox's ip in
23.now under PROTOCAL click add>add protocol
24.under the new window click press the down arrow and click TCP
25. name it TCP
26. now you should have 2 bars under you asking for remote a local ports
27.under local port put make sure the longer bar with the down arrow says "other" and the smaller bar with the down arrow says "any"
28. now highlight "any" and click backspace and type in "3074"
29. now under the 2 remote port bars make sure the longerone says other and the smaller one says "any" and change "any" to "3074"
30. Click OK to add the protocol
31. now make sure the source is "any" and destination is your xbox and that you are allow this rule... then click ok to add the rule
32. now all you have to do is the same exact thing as the 2nd rule but on this 3rd rule put the source as your xbox and destination as "any", keep the same thing for TCP and name this 3rd rule "Block TCP out" and finnally towards the upper right of the window there should be a pull down menu that says "allow", click the down arrow and select "block".
33.now add the 3rd and Final rule.
34. so your rules should look like this...
1.Bungie,XBL
2.Allow TCP IN
3. Block TCP OUT
36. alright now what this is doing is allow others to connect to you in TCP and UDP but you can only connect to them under udp not tcp so you are the only one that every one can connect to fully under tcp and udp.
